We carry R-410A and R-22 service equipment so we're not turning away older systems.
Straightforward flat-rate pricing, quoted after diagnosis.
If you're dealing with warm air blowing from the vents, ice forming on the copper line, or a condenser fan that's stopped spinning outside, you already know a system that's technically running but not actually cooling the house is one of the most misdiagnosed HVAC complaints there is.

Most AC repair problems give some warning before they turn into warm air blowing from the vents, ice forming on the copper line, or a condenser fan that's stopped spinning outside — catching it early usually means a shorter, cheaper fix.
AAA Pro HVAC built its AC repair process around one idea: diagnose first, quote honestly, fix it right.
We're licensed, insured, and staffed with techs who've spent years specifically on AC repair, not general handyman work with an HVAC certificate bolted on.

Every tech carries EPA Section 608 certification, required for legally handling refrigerant.
Trucks stocked and staged across High Point, FL mean shorter windows than a call-center dispatch model.
Diagnostic first, quote second, work third — that order never changes.
Manifold gauges, digital thermometers, and airflow meters confirm the actual fault, not a guess.
Every job starts with a real diagnosis, not a guess — here's the full scope of what our AC repair technicians handle across High Point, FL.
Low charge is a symptom, not a diagnosis — we find the leak with electronic detection and UV dye before recharging. This is one of the most requested AC repair calls we get across High Point, FL.
We test motor amperage against rated draw before replacing. Techs handling condenser fan motor repair carry the specific parts and tools this job calls for, not a generic kit.
We check for coil frost, which usually points to airflow or charge issues upstream. This is one of the most requested AC repair calls we get across High Point, FL.
Hard-starting, humming-but-not-spinning, or tripped breaker symptoms get tested with a start capacitor check before any compressor is condemned. This is one of the most requested AC repair calls we get across High Point, FL.
A miscalibrated or miswired thermostat can mimic a full system failure. Techs handling thermostat calibration & wiring carry the specific parts and tools this job calls for, not a generic kit.
Error codes on the wall unit display get cross-referenced against the manufacturer's chart. Techs handling ductless mini-split diagnostics carry the specific parts and tools this job calls for, not a generic kit.

Tell us whether the air is warm, the unit is icing, or it's not running at all — that detail changes what parts ride along.
We text when the tech is en route so you're not watching the driveway.
You see the flat-rate number before approval, tied to the confirmed diagnosis.
Workmanship is backed in writing on your invoice.

Turned out to be a slow leak at the schrader valve — they found it with dye, fixed it, and recharged properly.
Outdoor unit had ice forming on the copper line which I'd never seen before.
Condenser fan had completely stopped and the compressor was still trying to run.
Mini-split in the sunroom was throwing a code I couldn't find online.

Usually low refrigerant charge from an undetected leak, a dirty evaporator coil, or restricted airflow from a clogged filter.
Turn the system off, set the fan to run, and call — running a frozen coil makes the underlying problem worse.
Every system has a manufacturer-specified charge amount — we don't top off blind, we charge to spec using superheat/subcooling readings.
We carry recovery equipment rated for legacy refrigerants.
Yes — indoor head units, outdoor condensers, and line sets all fall under our service scope.
We prioritize no-cool calls with vulnerable occupants when scheduling.

Our AC repair crews are positioned throughout High Point, FL to keep response times realistic, not just promised.
☎ Call +1-866-805-8548 for High Point Service